Standard Bedroom Closet Depth. The standard closet depth in the u.s. But remember, this depth is not adequate for hanging clothes.
Wardrobe drawing width picture 1286336 standard. The standard door thickness for interior doors is 1 ⅜ inches, though if your interior door is taller than 80 inches or wider than 36 inches, the recommended thickness by building codes increases to 1 ¾ inches. The width of the closet ideally is half the width of the room, if not more.
For Coats And Jackets, Use A Depth Of 28 Inches.
There is no general standard width for closets, but many builders allow 48 inches of rod length per person using the closet. The standard depth of a hinged wardrobe is 24 inches. Use a depth of 28 inches for coats ;
A Practical Guide To Barrier Free Washrooms Construction Canada.
A closet less than 22 inches deep isn’t deep enough to allow hanging clothes. 24 inches is the standard depth to fit most hangers. 9ft standard closet kit coastal teak.
See Also Garage Door Repair St Johns Fl.
Your building codes may specify minimal dimensions. The standard door thickness for interior doors is 1 ⅜ inches, though if your interior door is taller than 80 inches or wider than 36 inches, the recommended thickness by building codes increases to 1 ¾ inches. Double hang entire closet (84” for top shelf and 42” for bottom shelf).
The Width Of The Closet Ideally Is Half The Width Of The Room, If Not More.
Is 24 inches or 61 cm, but you can also opt for a narrower closet depth of 20 inches if desired. The comfortable recommended depth of a closet is 24” (61 cm), but closet depths as narrow as 20” (50.8 cm) can be used if desired. Standard dimensions for bedroom closets vary based on the type of closet.
This Gives Enough Space To Hang Clothes And Also Provides Clearance So That The Clothes Are Not In Direct Contact With The Walls.
I've lived with these, and it was unpleasant. A closet of this depth should only be an arm's length wider on each end than the door opening. The depth of shelves between 11 and 15 inches deep is the best.